REDDI STURDY are heavy and strong built consist of 4/6-pole (1450/960 RPM) continuous rated duty squirrel cage submersible air fill dry type induction large electrical motors, heavy load bearing capacity high temperature grease lubricated longer life bearings, proper fit type dual sealing arrangements, heavy rotor shaft which carries single/two vane semi open non clogging very high solid handling capacity balance impeller suitable for heavy raw sewage / mud / slurry applications.
ENGINEERING / TECHNICAL DATA SHEET
• | Power | Up to 150 H.P. (110 KW) |
• | Flow | Up to 33,333 LPM (2000 m3/hr.) |
• | Head | Up to 70 mtr |
• | Outlet | Up to 300 mm (12 inch) |
• | Solids | Up to 120 mm (4.73 inch) |
• | Motor | Four/Six pole continuous duty squirrel cage submersible air fill induction dry type |
• | Speed | 1500/1000 RPM (synchronous) (4/6 pole) |
• | Supply | 415 V, 3 Ø, 50 Hz |
• | Protection | IP 68 |
• | Insulation | F Class |
FEATURES / BENEFITS
- Pumping of Heavily Sewage/Mud.
- Thermal Overload Protection.
- Mechanical Seal Protection.
- Semi Open Non-Clog Impeller.
- Robust Construction.
- Double Mechanical Seal.
- Excellent Solid Handling Capacity.
- Ruff and Tuff Successful Design.
USAGES / AREA OF APPLICATIONS
- Pumping of Sewage/Wastewater.
- Effluents with Slurry and Solids.
- Pumping of Unscreened Sewage.
- Transfer of Suspended Solids.
METALLURGY WE PROVIDE
• | Pump Casing/Volute | IS 210 Cast Iron FG 260 Grade |
• | Motor Body/Housing | IS 210 Cast Iron FG 260 Grade |
• | Impeller of Pump | IS 210 Cast Iron FG 260 Grade |
• | Suction/Wear Plate | IS 210 Cast Iron FG 260 Grade |
• | Mech. Seal (Upper) | Carbon vs. Silicon Carbide |
• | Mech. Seal (Lower) | Silicon Carbide vs. Silicon Carbide |
• | Pump Shaft | Stainless Steel 410 Grade |
• | O rings | Nitrile Rubber (NBR) |
• | All Fasteners used | Stainless Steel Grade |
• | Auto couple guide | IS 210 Cast Iron FG 260 Grade |
• | Cable | PVC insulated double sheath copper conductor flexible round type |
• | (Special MOC’s available on request) |